Create a compact traditional sauna space at home with this two-person Canadian hemlock indoor sauna. The 1500 × 1200mm cabin combines a full-height glazed front with a glazed side wall, timber slat detailing and a full-width rear bench.
The sauna is supplied with a Harvia BC30E 3kW electric sauna heater and external control panel, with ceiling-mounted LED lighting and ventilation built into the cabin design.
What This Product Is
This is a rectangular, panel-built indoor traditional steam sauna manufactured from Canadian hemlock. The glazed front and side panel create a more open interior feel, while the timber slat detailing adds privacy and a distinctive modern finish.
Capacity and Dimensions
Capacity: Up to 2 people
External Dimensions: 1500mm wide × 1200mm deep × 1900mm high
The full-width rear bench provides seating across the back of the cabin. The stated two-person capacity is based on the supplied layout and seating arrangement rather than a supplier-stated occupancy rating.
Installation Environment
This model is intended for indoor use only. Install it on a dry, firm and completely level floor in a well-ventilated indoor area. It must not be installed outdoors or exposed to rain, standing water or persistent damp.
Power and Electrical Requirements
Heater: Harvia BC30E external sauna heater
Rated Power: 3000W
Amperage: 16A
Connection: Hardwired mains connection
The heater, external controller, circuit protection, isolation, cabling and final electrical connection must be specified, installed and tested by a qualified electrician. The sauna is not supplied as a plug-and-play appliance.
Heating System Overview
The included Harvia BC30E 3kW heater provides traditional sauna heat for the cabin. The external control panel allows the heating system to be operated separately from the stove, while the ceiling LED light provides ambient illumination during use.
