High-Output Heating & Cooling for Fully Controlled Cold Plunge Setups
The KOVE Ice Bath Chiller – 1HP (Heat & Cool) is a higher-output temperature control unit built for serious home routines and commercial-style usage. It delivers rapid cooling performance, adds heating for full seasonal control, and includes app-based operation for straightforward day-to-day management.
If you plunge frequently, share the tub, run a gym/PT setup, or want fast pull-down times with minimal compromise, this is the step-up unit designed for repeatable use.
Performance (Fast Pull-Down Compared to Typical Consumer Units)
Cooling performance is where higher-output systems justify themselves. This unit is rated to reduce water temperature from 23°C to 5°C in approximately:
-
200L: ~2.7 hours
-
400L: ~5 hours
Real-world results depend on starting temperature, ambient conditions, insulation, and whether the tub is covered — but this unit is designed to be meaningfully faster than lower-output chillers.
Cooling + Heating Output
-
Cooling capacity: 2500W
-
Heating capacity: 3600W
-
Temperature range: 3–42°C
-
Refrigerant: R32
Electrical & Operating Specs
-
Power supply: 220–240V, 50Hz
-
Input power: 1050W
-
Compressor power: 850W
-
Usage environment: 0–45°C
Water Quality Systems & Practical Ownership Features
For repeat use, water quality and setup reliability matter as much as headline cooling numbers. This model includes built-in systems designed to reduce day-to-day friction.
-
UV + ozone sanitation features
-
Built-in self-priming system for easier setup
-
20 micron paper filter (10 inch)
-
External filter support
- WiFi control via iOS & Android app
Mobility & Setup
-
Wheels for easy repositioning
-
Carry handle for practical handling
-
Quick connectors for fast hose connection
The unit uses standard 1/2-inch connections, making it compatible with all KOVE ice baths and most third-party tubs using standard fittings.
Size, Weight & Certifications
-
Dimensions: 54 × 40 × 55 cm
-
Weight: 36 kg
-
Certifications: ETL, CB, CE, SAA
-
Hose length: 1.7m
-
Power cable length: 2.3m
KOVE vs Cheaper “Heat & Cool” Chillers
| Category |
KOVE 1HP |
Typical Cheaper Units |
| Cooling speed |
High output (fast pull-down) |
Often slow in real conditions |
| Heating performance |
Integrated heating (3600W) |
Often limited, unclear, or inefficient |
| Control |
WiFi app (iOS & Android) |
Usually basic panel-only |
| Sanitation |
UV + ozone features + 5 micron filter |
Often not included |
| Designed for frequent use |
Yes (repeatable routines) |
More variables / less consistency |
Bundle Recommendation (Best Practice Setup)
The strongest setup is a KOVE Ice Bath + KOVE Chiller — standardised fittings, known flow expectations, and a system designed to work together.
This unit is also broadly compatible with other tubs using standard 1/2-inch connections.
FAQs
Does it heat and cool?
Yes. You can run cooling-only, heating-only, or maintain a target temperature within the supported range.
Is the app required?
No — the app is optional. It’s there for convenience and remote control.
Is This Chiller Suitable for Commercial Use?
Is This Chiller Suitable for Commercial Use?
KOVE chillers can be suitable for shared use, including gyms, studios, wellness centres and other environments where multiple users are plunging throughout the day, provided the correct model is selected and appropriate maintenance is carried out.
Higher usage places significantly greater demands on the filtration system. As a minimum:
- The secondary hair net filter should be inspected and cleaned daily, or more frequently where required.
- The primary filter cartridge should be inspected regularly and replaced whenever water flow becomes restricted or in accordance with the maintenance schedule.
- Water chemistry should be monitored and maintained to help protect the chiller and ensure water quality.
- Adequate water flow and ventilation must be maintained at all times.
Failure to maintain the filtration system can restrict water flow, potentially leading to reduced performance or damage to internal components.
Not every KOVE chiller is designed for every commercial application. Factors such as plunge size, water volume, ambient temperature, user frequency and operating hours all influence the appropriate specification. Call us for more advice.
Why Choose KOVE?
KOVE equipment is built around repeatable performance: compatibility, durability, and practical ownership. You’re paying for consistent control and systems that support regular use — not inflated claims.
